Exhibitor products

Continuous inkjet printers (CIJ) • Easy-to-integrate industrial inkjet printers for the reliable and economical coding of products and packaging • Excellent print quality on a wide range of substrates • High-performance inks, suitable for the most demanding product surfaces • In-house ink development & production (member of EuPIA) • Intuitive operation & easy configuration of your print jobs • Seamless integration: supporting all common industrial communication protocols • Reduced downtime in your production line through easy replacement of consumables & elimination of print head cleaning • Effective prevention of malfunctions through Domino Cloud remote diagnostics & event alarms, making preventive maintenance redundant • IP66 protection class for demanding applications

The AXES GATE is an industrial safety gate for fall protection or safe machine access that will exceed your expectations in terms of safety, sustainability and cost-effectiveness. AXES GATES have been used worldwide for 20 years in the harshest and most challenging environments, such as the chemical industry and offshore drilling rigs. They are highly resistant to harsh weather conditions, extremely salty environments and highly corrosive chemicals. The safety gate's design, composition and features make it suitable for any application in any industry. The AXES GATE is made of Boplan High Impact Thermoplastic Engineered Polymer (HI-TEP) and has an unrivalled service life. The hinge has been tested for over 150,000 cycles. This corresponds to opening and closing the gate 20 times a day for 20 years. Thanks to our innovative design, installation is a breeze and requires few tools and little effort. The AXES GATE can open in two directions and can easily be adjusted to the desired size.

AZ Series – Hybrid Stepper Motors with Mechanical Absolute Encoder The AZ Series combines hybrid stepper motor technology with a built-in, battery-free mechanical multi-turn absolute encoder (ABZO sensor). This enables absolute positioning over ±900 (or ±1,800) revolutions without the need for external sensors. Motors run open-loop under normal operation for smooth, vibration-free motion and switch automatically to closed-loop control under load changes to ensure reliable positioning without loss of synchronism. Key Features • Integrated STO function for AC and DC input voltage drivers (depending on model) • Battery-free mechanical multi-turn absolute encoder (ABZO) integrated as standard • Absolute positioning range: ±900 (standard) or ±1,800 (extended) revolutions • Open-loop operation for quiet running; closed-loop engagement for overload conditions • Frame sizes: 20 mm, 28 mm, 42 mm, 60 mm, and 90 mm • Gearhead options: spur gearheads, planetary gearheads, Harmonic Drive® • Wide variety of actuators available: linear actuators, rotary actuators, grippers, and more • Control flexibility: pulse-direction input, digital I/O, or fieldbus communication (EtherCAT, EtherNet/IP, PROFINET, Modbus RTU) • Integrated monitoring and diagnostic functions for reliable system operation • Optional electromagnetic brake for holding loads in vertical applications

With the new practical DHS-150 door handle system, the slimline AZM150 solenoid interlock from Schmersal is now even easier to use. The ergonomic DHS-150 avoids the need for a separate door handle and is suitable for machine enclosures or fencing and for all standard aluminium profiles with a width of 40 mm. The robust door bolt is particularly useful on heavy swing doors and in for use in harsh environments. One benefit of the new accessory is that the actuator is pre-positioned by the bolt in the DHS system, thus ensuring its optimal insertion into the device. This gives the system stability against lateral forces. In the event of lateral forces on interlocks that cannot be overcome, the safety door will not be opened – thus causing delays in the production process. In this regard, the DHS-150 door handle system, in conjunction with the AZM150 solenoid interlock, contributes to improved system availability. In addition, the DHS-150 door handle system is also equipped with an integrated locking device (LOTO). This locking tag function protects operating staff from mistakenly being locked inside larger, walk-in systems and machines while they are performing servicing and repair work. The locking device ensures that the door of the protective device cannot be closed and unintentional machine start-up is prevented. The AZM150 solenoid interlock has an interlocking force of 1500 Newtons and is characterised by a slimline, space-saving design. In addition, it can be combined with three different actuators for different attachment situations. A positive of the interlock is the rotating actuator head which can be locked with ease by simple placement on the cover, rather than being bolted into place. The rotating actuator head with its two insertion slots enables various installation positions and actuating options and makes the interlock particularly versatile in use.

With dimensions of 119.5 x 40 x 20 mm, the AZM40 is an extremely compact electronic solenoid interlock. This makes it especially suitable for small safety doors and flaps. Thanks to the 180° angle flexibility of the actuator, it can approach the AZM40 on a stepless basis, making the interlock also suitable for flaps which do not close at 90° or those that open upwards to a 45° angle. This means the angle flexibility helps the interlock easily fit into compact spaces and those which are difficult to access. The AZM40 can also be fitted to standard 40 mm profiles without projecting. “The solenoid interlock meets the requirements of many users looking for space-saving solutions, as space required is a decisive cost factor in production,” explains Stephan Frick, Product Manager at Schmersal. Despite its compact size, the AZM40 has an amazing 2000 Newton interlocking force. “An interlock must be selected to withstand the anticipated forces. With interlocking force of 2000 Newtons, users are on the safe side with respect to the recommendations in the standard,” explains Stephan Frick. Thee integrated RFID technology allows a coding level of “high”. This means the interlock offers increased tamper protection in accordance with the requirements of DIN ISO 14119. The AZM40 works on the bistable principle: In the event of a power cut, it retains the current position. This ensures safe operation, whatever the status of the machine. Even if there are hazardous run-on movements, the safety door remains safely locked in the event of a power failure. Another advantage of the bistable principle is the consistently low energy consumption, as the interlock only requires power when the door is to be locked or unlocked.

The scalable power modules of the mono units are offered with an extended power range up to 400 kW. Applications with a power requirement above 400 kW can also continue to be realized by connecting multiple converters in series. With fuse ratings optimized still further, the new devices are even more precisely configurable for the respective application. Highly reduced installation space For the b maXX 6500 mono units, the dimensions could be reduced significantly and the power density greatly increased. In the case of the size 4 with a power range up to 75 kW, for example, this means a saving of 71% compared with the market average. The new mono devices therefore require less space in the control cabinet and can be installed in the most confined space even more easily. Maximum power The peak power for the new b maXX 6500 mono devices was increased considerably. Compared to the b maXX 5500 series, for e.g. servo, the size 4 devices achieve a peak current that is 20 percent higher. This allows the use of a smaller installation size in many applications, thus further optimizing space requirements in the control cabinet as well as costs. Alongside the physical machine footprint, the material savings in the servo drives and control cabinets also mean a reduction in the ecological footprint and more sustainability. Application-optimized through scalability The b maXX 6000 devices have maximum scalability due to numerous hardware and software options and can therefore be even better adapted to the application requirements.

Bachmann electronic presents the new version of its software solution M-Target for Simulink®. A key highlight of M-Target 2.75 is hot-standby redundancy, which covers protection for critical applications with high availability requirements. With M-Target 2.75, developers can design and simulate their application programs directly in the graphical Simulink® environment as usual and automatically transfer them to real-time controllers—without any manual programming. Hot-standby redundancy now also enables applications to be executed in parallel on two physically separate CPU systems. In the event of an error, the standby system takes over control seamlessly, without interrupting the process or causing value jumps. This is particularly relevant for systems in harsh environments, safety-critical applications or scenarios where even short downtimes would be expensive. Redundancy extends across all system levels – from hardware to runtime software and user programs – and is fully integrated into Bachmann's engineering tools such as SolutionCenter. In addition to redundancy, M-Target 2.75 offers extended bluecom® blocks, which improve data transmission in time-critical networks. New additions include function blocks for generating, compressing, and storing WAV audio files from structure-borne noise measurement data from the AIC214 and AIC206 condition monitoring modules. In addition, errors in the logging and SVI environment have been corrected, security updates have been implemented, and support for current MATLAB®/Simulink® versions (up to 2025a) has been added. The software remains backward compatible, but requires M-Base 4.85 and the redundancy module from version 1.23R for the hot standby function. The solution can be optionally combined with the redundancy option of the atvise® scada system for high-availability visualizations.

Two new modules are available for the fieldbus connection of the new M100 control system from Bachmann electronic: In addition to the already launched EtherCAT coupler, modules for the CANopen and Profinet bus connection have been released, making it easy to implement industrial applications. With the M100 system, Bachmann electronic is consciously reducing the number of variants: instead of different module types with limited functions, a wide range of functions is available on the I/O modules. The M100 bus couplers for different fieldbus systems make these functions accessible independently of the fieldbus used, and configuration is always carried out in the same tool with the same “look and feel”. The bus couplers follow the M100 system philosophy: They offer state-of-the-art IT security, combined with durable hardware for continuous use in challenging environments and unmanned systems. LEDs provide intuitive information about overall station status. Additional fieldbus LEDs for 'RUN' and 'ERROR' show standardized colors and flashing patterns for the respective fieldbus. EtherCAT and Profinet stations receive addresses from the master during start-up. For the CANopen bus coupler, the address is still set via hardware switches. Fieldbus-related features such as bandwidth, addressing, missing station handling, or synchronization options do change. However, basic configurator operation remains unchanged and consistent. Troubleshooting information such as operating counters, diagnostic telegrams or emergency messages are provided to the fieldbus master according to the standard. In addition, further information can be collected via a local USB-C connection. Important data such as startup information, messages from the fieldbus stack, status changes in the local status machine, or changes in connection quality are stored in the logbook.

Bags and sacks offer flexible packaging solutions for the protection, storage and shipping of a wide variety of products. Antalis Packaging provides a broad range of options, from LDPE flat bags and resealable bags to gusseted liners, shrink hoods and film solutions for industrial applications. They reliably protect goods against dust, moisture, contamination and damage and, depending on the design, are suitable for packaging, bundling, covering or secure sealing. They are particularly useful when products need to be packaged cleanly, clearly and space-efficiently – whether in warehouses, production environments or shipping operations.

Ballscrews, also known as ball bearing screws or recirculating ballscrews, are used in a wide range of applications across virtually all areas of industry. They convert rotary motion into linear motion. Between the shaft, more precisely the threaded shaft, and the nut, the balls roll infinitely via a ball recirculation system, guaranteeing frictionless motion for your application. HIWIN offers a huge selection of spindle drives / drive spindles along with matching accessories.

Users often face a dilemma when selecting sensors: Either they opt for inexpensive products that compromise on quality and handling – leading to frequent retrofits, machine downtime, and high personnel costs. Or they choose expensive components with numerous, often unnecessary features that increase the investment and require expert installation knowledge. With Balluffs Entry Line products, theres no "or" but rather an "and": You get precisely the functions you need for standard applications – in proven Balluff quality, without unnecessary frills, and at an unbeatable price-performance ratio.

The H2D Pro is a high-performance dual-extruder 3D printer designed for professional applications, with a focus on precision and process reliability. Thanks to its LAN connectivity, wear-resistant nozzle and advanced calibration functions, it delivers consistent results, making it ideal for technical materials and industrial use.

Cost-effective battery driven strapping tool The LGT 260 is the cost-effective entry-level battery strapping tool. The LGT 260 combines all necessary operations – tensioning, closing and cutting – in one device. The strap tension can be set variably, up to 2800 N. This ensures that the device is extremely suitable for strapping in the paper, logistics, metal, wood or construction industry. The LGT 260 is battery drivcen, ideal for strapping at various locations. The device is light in weight, ergonomically balanced, so that an operator can work easily and quickly. Cost-effective PET and PP strap, 13-16 mm Easy operation Up to 2,800 N tension force