Exhibitor news

ifm pressure sensors have proven to be a reliable solution in the food and beverage industry for many years. Following the successful updates of our transmitters and display versions, the PG manometer has now also been revised, introducing a rich set of new and improved features. The multicolour LED display enables clear and unambiguous visualisation of pressure ranges, switch points and minimum and maximum values. Mechanical pointers, which are prone to errors, are replaced by durable and highly visible LEDs. This technological advancement ensures improved clarity and reliability.

For more than 50 years the classic Euromas industrial enclosures have been an integral part of Bopla Gehäuse Systeme GmbH’s product range. With two materials, basic designs and lid variants each, Euromas X satisfies the typical demands made of IoT devices – with no compromises! At the same time, and with its new sizes, the enclosure variant fills the gaps in the Euromas range. The Internet of Things (IoT) requires the capture and processing of large quantities of data in almost all aspects of life and everywhere in the world. Operating the devices used for this purpose should, of course, be as easy as possible. Normally this means fewer and simpler keys and status displays which ideally are combined in a single membrane keypad. At the same time, the devices must be installed quickly and without any problems at the place of use – and when possible without any need to open the device. Two materials, two basic designs and two lid variants No problem for Euromas X. In all cases, the new enclosure, available with or without moulded-on wall brackets for problem-free mounting, has a recessed surface for the integration of membrane keypads. As for enclosure materials, the customer can choose between ABS for cost-optimised applications and polycarbonate (PC) for use in challenging circumstances. For Euromas X enclosures made of PC, and in addition to the opaque lid, BOPLA offers a crystal-clear lid. The classic Euromas enclosure colour is light grey (similar to RAL 7035). Additional sizes With regard to the sizes of the new Euromas X enclosure, BOPLA took into consideration the requirements of typical IoT devices. Numerous intermediate sizes and square designs fill a number of gaps in the Euromas range.

- 6 lengths from 190 to 1040 mm - Robust aluminum housing - Tempered float glass front panel - Homogeneous, flicker-free light - M12 connector

For a long time, grey, rectangular enclosures dominated industry, mechanical engineering and infrastructure. This design is still in demand because it is robust, space-saving and versatile. At the same time, requirements have changed: design, feel and usability now play a central role wherever electronics are visible and used regularly. ‘Today, an enclosure is much more than just a protective shell,’ says Mathias Bünte from BOPLA. ‘It becomes a visible part of the product and a carrier of brand and product values. Especially with complex technology, the external appearance is becoming increasingly important.’ From protective enclosure to user interface This development is driven by modern operating concepts from consumer electronics. Enclosures are increasingly functioning as three-dimensional user interfaces. In addition to buttons, switches and indicator lights, digital components such as touch displays, sensors, light elements and antennas are being integrated. BOPLA develops enclosures that meet these requirements while also incorporating the brand's colour and design language. This allows industrial devices, such as controls in agricultural or construction machinery, to be integrated into a holistic brand experience. Material and manufacturing diversity This diversity is based on a broad spectrum of manufacturing and processing technologies. In addition to plastic injection moulding, aluminium profile, aluminium die-casting and stamping-bending technology, BOPLA also relies on additive processes such as 3D printing. Customised solutions are also possible for surfaces and colours. The high level of vertical integration enables machining, coating, painting, printing and system integration from a single source. ‘We can produce both large series and small, exclusive quantities,’ says Bünte. ‘From housing machining to the integration of electronic components, we create solutions that are precisely tailored to our customers' requirements.’

SoftProject its group of companies with dataspot. from Vienna, taking an important strategic step for the future of data management and process digitization. Together with Blueway, a European provider is emerging that enables end-to-end data value creation at a depth and breadth that has hardly been available on the market until now. The new group brings together comprehensive expertise indata governance,data integration, andprocess automation. For customers, this means greater innovation, deeper solutions, and long-term stability—while remaining true to dataspot's values and DNA.

Under the motto "From the Machinery Directive to the Machinery Ordinance - Experiences and Challenges from Practice" you will receive an overview of the changes and challenges that the new Machinery Ordinance brings with it. Relevant standards will be explained to you using a practical example and concepts for safety and security on your machine will be created. Think about tomorrow now and prepare yourself optimally for the deadline! The seminar is aimed at machine manufacturers, designers, safety officers as well as maintenance staff and production managers in companies.

TRsystems from Trossingen has developed a suitable solution for the discontinued SIMATIC Comfort Panels TP1500, TP1900 and TP2200. Among other things, the “notion.S - Comfort Panels” series fulfills the “WinCC Advanced” HMI functionality. As the notion.S - Comfort Panels are equipped with the latest operating systems, they are also prepared for future developments of HMI systems. The long-term available and maintenance-free technology includes compatible installation dimensions, exchangeable data carriers and a significantly higher performance capability. In addition to the TCP/IP connection, the Ethernet interfaces offer connection to SIMATIC-S5 and SIMATIC-S7 controllers via additionally available accessories. State-of-the-art capacitive touchscreen haptics and device optics promise the smartphone feeling common today. Siemens, WinCC und SIMATIC are registered trademarks of Siemens AG, München

FLEET PRO control cabinet enclosure with IP67 protection from BOXEXPERT The FLEET PRO control cabinet enclosure from BOXEXPERT was developed for applications requiring maximum sealing and durability. With an IP67 protection rating, the enclosure offers complete protection against dust and temporary immersion in water – ideal for outdoor use or in damp, dusty environments. Made of robust ABS plastic, the enclosure is available in sizes from 300 x 200 x 130 mm to 800 x 600 x 260 mm. It is suitable for demanding control and distribution applications in mechanical engineering, industrial automation, or plant engineering. The door is available in either light gray (RAL 7035) or transparent and is secured with a one-point triangular locking mechanism. The sealing strip and lock are available in telegray (RAL 7045), matching the overall design. The enclosure meets IK08 impact resistance, is temperature-resistant from -35°C to +65°C, and is designed for electrical applications up to 800 A/690 V. The scope of delivery includes: base, door with foam-in seal, galvanized sheet steel mounting plate, four wall mounting brackets, locking key, and mounting screws. BOXEXPERT also offers a wide range of accessories and custom enclosure machining services – even in small quantities. BOXEXPERT – Professional enclosure technology from the North.

For a new special-purpose machine project, GEFASOFT required a compact and reliable display unit that could be mounted directly at the USB removal station. The system is part of an automated process in which robots and cameras transfer software onto USB sticks – with the highest precision and strict quality standards. The goal was to find a display that would clearly and visibly present the current machine status, prove robust in an industrial environment, and integrate seamlessly into the existing PLC control system.

The enclosure components of the innovative Bocube series are manufactured only with materials which comply with the UL safety standards and are halogen-free. This also applies to the PU foam seal, and means that all of BOPLA’s plastic enclosures meet the sector’s highest standards. In addition, Bocube polycarbonate enclosures satisfy the strict EN 45545 fire protection standard for rail vehicles and outdoor capability according to UL 746 C f1. BOPLA enclosures are almost entirely made of UL-listed materials. Of course, the Bocube industrial enclosure with its ABS and polycarbonate variants are no exception. After successful material certification according to UL50, this also applies to the injected polyurethane foam seal. Bocube models made of polycarbonate are now the leaders when it comes to safety and sturdiness. Their material is classified in accordance with the most authoritative standard worldwide for assessing the flame retardancy of plastics – UL 94 – as flame retardant and self-extinguishing with flammability rating UL94 V-0. Matthias Bünte, product manager at BOPLA, explains: “In addition, it even meets the especially strict requirements of fire protection standard for rail vehicles EN 45545 for use in hazard class HL3.” And the Bocube variants made of PC can do even more! They also proved their special suitability for outdoor use according to UL 746 C f1. This means that their material passed all the relevant flame protection and mechanical tests with flying colours even after exposure to artificial weathering (1000 hours of exposure to UV light and seven days of immersion in 70°C hot water). Bocube enclosures – innovative and with plenty of variants The sturdy industrial enclosures in the Bocube range stand out thanks to their well thought out mechanical construction and their elegant design with colour-contrasting hinged catches.

The Progress® Brass hydraulic hose adapter is specially designed to ensure reliable fixing and sealing of hydraulic hoses in industrial applications on cable glands. The adapter offers optimal protection, especially in environments with extreme conditions such as high humidity, temperature fluctuations or mechanical stress. With protection classes IP68 and IP69 and a temperature range of -50°C to +105°C, it ensures permanent sealing and durability. Compatibility with various connection threads from M20 to M32 and certification according to EN 45545-2 HL3 and NFPA 130 make the adapter a versatile solution for industrial applications. This adapter was developed for harsh environments and offers the flexibility to cover a wide range of cable diameters. This means that installers can rely on a product that can withstand the demanding conditions in industry while enabling quick, precise installation.