Exhibitor news

The new BOP 7.0 PQ and BOP 10 BoPad console variants are based on the existing BOP 7.0 and BOP 10.1 BoPad enclosures, but their higher shape provides more space for the installation of electronic components. The new design has a greater angle for the operating surface, and this ensures more operating comfort. In addition, side-mounted recessed grips make it even easier to handle the BoPad enclosures. The rear panel is positioned further back, which increases the mechanical protection of the interfaces. As with all the hand-held and console enclosures in the BoPad range, the new models also have a recessed area in the lid for the integration of membrane keypads and touch screens. A polished frame creates a high-quality appearance and protects the operating surface. All BoPad enclosures provide protection class IP40 as standard. However, this can be increased to a maximum of IP65 at any time by the use of optional seals in four colours (black, white, signal red and signal blue), and also subsequently if required. All BoPad enclosures are supplied in two colours (black and white). In addition, and especially for BoPad hand-held enclosures BOPLA offers as an option coloured impact protection in black, signal yellow, signal red and signal blue. As always, BOPLA can provide special colours on request for enclosures and impact protection.

BOPLA’s Mathias Bünte explains, “CombiNorm-Control is especially interesting for applications in the building automation sector or in so-call smart homes. The German DIN 43380 has established itself as an international standard in this field of application.” CombiNorm-Control has a typical “T-shape” design, and the front part of the enclosure is dimensioned in such a way that it can fit through a standardised panel cut-out with a height of 45 mm. In the rear section there is assembly space on both sides for connection terminals. Of course, for a standardised enclosure system the width is also defined precisely and stated in “M” module widths (1M = 17.5 mm). CombiNorm-Control is available in five different standard widths, and more versions are planned. As with all products in the CombiNorm series, the integrated DIN rail adapter makes possible fast, efficient mounting on a TS35 DIN rail in accordance with DIN EN 60715. For a fast start to a project, BOPLA offers its customers a complete set in every size with the matching terminals and standard accessories. Although to a large extent the external enclosure design is determined by the DIN norm, the configuration can vary considerably, depending on the application. For this reason, CombiNorm-Control is mostly constructed in a modular way. The enclosure can be configured individually with the use of different front panels and terminal covers. The basic body consists of few individual components which can be latched together without the use of any tools.

BOPLA’s Mathias Bünte explains, “CombiNorm-Control is especially interesting for applications in the building automation sector or in so-call smart homes. The German DIN 43380 has established itself as an international standard in this field of application.” CombiNorm-Control has a typical “T-shape” design, and the front part of the enclosure is dimensioned in such a way that it can fit through a standardised panel cut-out with a height of 45 mm. In the rear section there is assembly space on both sides for connection terminals. Of course, for a standardised enclosure system the width is also defined precisely and stated in “M” module widths (1M = 17.5 mm). CombiNorm-Control is available in five different standard widths, and more versions are planned. As with all products in the CombiNorm series, the integrated DIN rail adapter makes possible fast, efficient mounting on a TS35 DIN rail in accordance with DIN EN 60715. For a fast start to a project, BOPLA offers its customers a complete set in every size with the matching terminals and standard accessories. Although to a large extent the external enclosure design is determined by the DIN norm, the configuration can vary considerably, depending on the application. For this reason, CombiNorm-Control is mostly constructed in a modular way. The enclosure can be configured individually with the use of different front panels and terminal covers. The basic body consists of few individual components which can be latched together without the use of any tools.

BOPLA’s Mathias Bünte explains, “CombiNorm-Control is especially interesting for applications in the building automation sector or in so-call smart homes. The German DIN 43380 has established itself as an international standard in this field of application.” CombiNorm-Control has a typical “T-shape” design, and the front part of the enclosure is dimensioned in such a way that it can fit through a standardised panel cut-out with a height of 45 mm. In the rear section there is assembly space on both sides for connection terminals. Of course, for a standardised enclosure system the width is also defined precisely and stated in “M” module widths (1M = 17.5 mm). CombiNorm-Control is available in five different standard widths, and more versions are planned. As with all products in the CombiNorm series, the integrated DIN rail adapter makes possible fast, efficient mounting on a TS35 DIN rail in accordance with DIN EN 60715. For a fast start to a project, BOPLA offers its customers a complete set in every size with the matching terminals and standard accessories. Although to a large extent the external enclosure design is determined by the DIN norm, the configuration can vary considerably, depending on the application. For this reason, CombiNorm-Control is mostly constructed in a modular way. The enclosure can be configured individually with the use of different front panels and terminal covers. The basic body consists of few individual components which can be latched together without the use of any tools.

Selecting the right servo controller for industrial applications is often complex and time-consuming. With the new KeDrive configurator from KEBA, this process is now much easier and more convenient: a quick and targeted product selection without having to search through large catalogs or uncertainties about compatibility. Find the right solution quickly, intuitively and error-free The KeDrive configurator focuses on the essentials: Simple operation, a clear structure and efficient product selection. Users can put together the right servo drives, supply units and corresponding accessories in just a few steps - with or without a selection guide. The configured device or drive system is immediately displayed in a 3D visualization. In addition, only compatible components are displayed, which prevents incorrect configurations. Size specifications also help to check directly whether the system fits into the control cabinet. Users can then request a non-binding indicative quote online or save their configuration for further processing at a later date. This makes it possible to make or change the Drives configuration at any time and from any location. Last year, KEBA successfully launched the HMI configurator. The KeDrive configurator was likewise realized in collaboration with Combeenation (www.combeenation.com) and is available in German and English. Maximum efficiency for specialists in the industry The new KeDrive configurator is aimed at design engineers, technical purchasers and machine developers. Also, system partners benefit from the simple selection and direct integration of compatible accessories. Thanks to the fast quotation generation and low entry level, this product configurator is not only a time saver but also ensures greater certainty when selecting the right solution.

We now offer a wide selection of drive technology components. Plain bearings, keys, axle holders, thrust washers and much more – available from us now.

Complete solution: Hand dispenser + 6 pre-stretched LDPE stretch film rolls • Lightweight & efficient: only approx. 2 kg total weight (dispenser and film), fatigue-free working • Ergonomic: reduces strain, supports MSE prevention • Robust: durable steel construction for continuous use • Practical: quick roll change, precise brake control • Space-saving: easy hanging thanks to curved shape. More efficiency in your warehouse processes – ready for immediate use.

Thanks to their high level of mechanical stability and also their resistance to UV radiation and changes in temperature, the Euromas and Bocube series of enclosures are the absolute specialists for outdoor use. They set the scene perfectly for modern industrial electronic products, which they also protect against extremely harsh environmental conditions, for example in IoT applications, in the radio technology sector or in smart cities. BOPLA has now developed a standardised high-quality stainless steel mast bracket for fitting to masts, posts, poles and pipes. Five sizes for the huge range of industrial enclosures The modular system consists of a mast bracket, a set of screws and a mast clamp. The special feature: BOPLA’s entire range of several hundred sizes and versions of industrial enclosures can be used with only five different mast bracket types. The positioning of the enclosures is not important, because fitting can be either vertical or horizontal. This flexibility is achieved by means of an intelligent arrangement of the drill hole diameters and positions, in addition to the partial use of slots. Stable mast bracket for every application The set of screws and the mast clamp are available separately. The set of screws can be supplied in three versions and combined with the mast brackets in any way required – the relevant configuration tables can be found on BOPLA’s website. The mast clamps are available in nine sizes for different mast diameters. This modularity gives the customer the exact matching system for any application. The mast bracket was designed especially for use with the Euromas and Bocube product ranges and can be adapted for other enclosure types on request.

Thanks to their high level of mechanical stability and also their resistance to UV radiation and changes in temperature, the Euromas and Bocube series of enclosures are the absolute specialists for outdoor use. They set the scene perfectly for modern industrial electronic products, which they also protect against extremely harsh environmental conditions, for example in IoT applications, in the radio technology sector or in smart cities. BOPLA has now developed a standardised high-quality stainless steel mast bracket for fitting to masts, posts, poles and pipes. Five sizes for the huge range of industrial enclosures The modular system consists of a mast bracket, a set of screws and a mast clamp. The special feature: BOPLA’s entire range of several hundred sizes and versions of industrial enclosures can be used with only five different mast bracket types. The positioning of the enclosures is not important, because fitting can be either vertical or horizontal. This flexibility is achieved by means of an intelligent arrangement of the drill hole diameters and positions, in addition to the partial use of slots. Stable mast bracket for every application The set of screws and the mast clamp are available separately. The set of screws can be supplied in three versions and combined with the mast brackets in any way required – the relevant configuration tables can be found on BOPLA’s website. The mast clamps are available in nine sizes for different mast diameters. This modularity gives the customer the exact matching system for any application. The mast bracket was designed especially for use with the Euromas and Bocube product ranges and can be adapted for other enclosure types on request.

Optischer Distanzsensor D-Serie DPE-10-500 von Willtec Messtechnik für zuverlässiges Messen auf dunklen Oberflächen- und dies sogar bei Außenanwendungen mit Sonneneinstrahlung! • Serielle Schnittstellen • Analog-Ausgang 0/4 ... 20 mA • Digitale Ein – und Ausgänge (Standard) • Weitere Schnittstellen und Funktionen sind durch den Kunden konfigurierbar

Our design department uses state-of-the-art CAD software to develop customized packaging solutions – even for complex, heavy, or customized products. This allows us to package prototypes and small series safely, quickly, and cost-effectively. Feel free to challenge us!

Thanks to our wide range of packaging technology and machines, we can offer the right technology for every requirement. Contact us, and we'll find the right solution for you!