Exhibitor products

Push in, fasten from the outside, ready: No thread or need to open an enclosure. Suitable for wall thickness up to 4.0 mm and available as part of our SPRINT system with various cap nut options as well as multiple and special sealing inserts.

Multi-channel Power Controllers • Single-phase control or three-phase control selectable • Wide voltage range : 220 to 440VAC • Various rated current models : 25A, 40A, 55A, 70A, 90A, 110A, 160A • Monitoring load current, voltage, output, resistance, heatsink temperature, power • Various alarm functions and history save option

• Modular power controllers with separate control and power modules • Connect up to 4 power modules to a single control module • Various rated current models : 25A to 600A • Single-phase control or three-phase control selectable • Various control types: Phase, cycle, ON / OFF control

ST series safety sensors are suitable for the monitoring of protective devices on machines without inertia and allow the system in which they are used to reach a safety category up to SIL 3, PL e and Category 4. These sensors use RFID technology and provide high protection against any manipulation thanks to a unique code transmitted by the actuator. Since they have no mechanical elements, they guarantee a long service life even in applications with frequent operating cycles and under harsh environmental conditions. Their protection degree is rated IP67 and IP69K and they mantain the maximum safety level PL e, even when connecting up to 32 sensors in series. It is possible to choose among 3 kinds of actuators with different fixing and actuating directions. This means that the sensors can be installed on all types of machines and guards, both large and small.

Turn-stackable bins are constructed in a way so they can be stacked on each other and nested as well. By turning the storage bins 180°, they can be pushed together in empty condition. This results up to 70% space gain. Like stackable containers, different versions are available; with closed or closed walls and / or bottom, food-grade or not, with optimized volume or no-nonsense construction. - E-line turn-stackable plastic bins are "no-nonsense" products at very attractive prices. - Hygienic turn-stackable bins are made in one piece by injection-molding. The upper edge is formed by a gas injection technique, so the edge is completely closed, smooth, making it easy to clean, and strong and still light, because it is hollow. The bins have white and black caps which immediately show in which position they can be stacked or nested. - Turn-stackable bin with straight walls are made of PEHD and have perforated side walls providing air circulation for cooling. Maximum internal volume is realized by straight side walls. The bin is available with a closed or perforated bottom. The bins are widely used for storage and transport of fruit, vegetables, meat and poultry and bakery products. - Hygienic turn-stackable bins have both a smooth inside and outside, even the top edge is completely round so the bins are very easy to clean. There are no places where dirt can accumulate. Also available with lid. - The Euro norm is not always the solution for all packaging issues. For several customers we holdturn-stackable bins with different sizes on stock, to fit better with their specific products.

low-noise, stackable, lightweight tray for e-commerce - Stackable - Color selection according to RAL and individually printable - Roller conveyor assembly - Flexible dimensioning - Recyclable recycled product

The easiest-to-use palletizing software on the market. - Proprietary software built on client needs - Intuitive touchscreen interface - Live view of palletizing progress

Our patent-pending STACKiT AI Vision brings Depal & Repal to a new level. Engineered for maximum versatility, STACKiT AI Vision offers true Plug & Play with automatic calibration, eliminating manual configuration, supports automatic variable multipick, optimizes operations with intelligent path planning, and provides 3D visual feedback.

BOXEXPERT presents the Treva INOX series, specially developed for demanding industries such as food, medicine, chemistry and petrochemicals. These stainless steel control cabinets provide a hygienically perfect environment with a smooth, chemical-resistant surface. The series, made of high-quality stainless steel AISI 304L and AISI 316L, satin finished with Scotch 320, ensures maximum shock resistance (IK10) and a high protection class of IP66, even against strong water jets. The Treva INOX housings are ideal for applications that cannot be covered by plastic housings. The robust surface and the foamed polyurethane seal in the door make it insensitive to aggressive substances, salt air and cleaning agents. The control cabinets offer protection against food acids and environmental influences without providing a target for germs and bacteria. The scope of delivery includes a mounting plate that can be attached without processing the housing wall, and a stainless steel cable flange plate. The mounting plate allows wiring outside the housing, while the flange plate with foamed gasket ensures IP66 protection when mounted. BOXEXPERT offers a wide range of accessories for the Treva INOX series, including hole-punched mounting plates, DIN rails, modular steel frames, interior doors, rain canopies, special locks and various mounting options. Special stainless steel cable glands, also in an extra-flat design, ensure a germ-free environment and enable easy cleaning of the housing system. Treva INOX is the optimal solution for hygienically demanding environments.

„Our new stainless steel profile enclosure combines high demands as to design, flexibility and functionality", says Wolfgang Zoll, sales manager of Georg Schlegel GmbH & Co. KG. The enclosure is based on a robust square profile made of 2VA stainless steel with a wall thickness of 2 mm and has been designed in a way that no screws are visible on the enclosure front side. The small-sized construction in a width of 40 mm exactly fits to each standard profile rail so that there is no overlapping and both - the enclosure and the profile rail - become a perfect unit. Besides, the stainless steel enclosure blends in harmoniously into different applications thanks to its reduced space saving height of only 40 mm. Also, relating to the mounting onto the profile rail the new solution scores: It just has to be put on and is being fixed by slot nuts with self-locking screws. In case a direct mounting to the wall is required, Schlegel also offers suitable solutions. For the equipment of the enclosure with 1 - 6 actuators customers can choose from the whole Shortron control unit range. The assembly is done by Schlegel in-house, upon delivery the stainless steel enclosure just has to be mounted to the profile rail. For the optimum adaption to individual requirements Schlegel is offering two connecting systems: For enclosures with 1 - 3 actuators via M12 connector and for those ones with 4 - 6 actuators with cable gland. The access to the enclosure is given via the bottom of the housing. Customised versions On request, Schlegel offers the new enclosure concept with customised equipment. Also in this case customer can choose from the whole Shortron control unit range. Beside the standard of up to 6 actuators it is also possible to get a versíon with more than 6 actuators, also in customised designs - up to a maximum length of 100 cm is possible. As an alternative, an additional enclosure concept with an extremely small size of 20 mm is planned.

Drives with the CM2H.. stainless steel servomotors have been specially designed for use in applications in the food industry, beverage production, and pharmaceutical industry. These are three industries with extremely high hygiene and cleanability requirements. Whether for aseptic filling systems for milk products or beverages, cutting machines for sausage or cheese, or filleting machines for fish or meat: SEW-EURODRIVE represents top-notch flexibility, longevity, and reliability. No edges and corners: Your solution for the highest hygiene standards Our stainless steel servo gearmotors from the PSH..CM2H.. series with a hygienic design meet the strict guidelines of the European Hygienic Engineering Design Group (EHEDG) and the U.S. Food and Drug Administration With a roughness below 0.8 µm and radii greater than 3 mm, the servo drives' housings have an exceptionally smooth surface and neither have rough edges nor any horizontal surfaces. Due to this high demand for longevity and easy cleanability, the compact units consisting of the synchronous servomotor and planetary gear unit are resistant against hot steam and corrosive cleaning agents As a result, they are perfectly suited for clean-in-place (CPI) and sterilization-in-place (SIP) processes. With the intention of making them quickly and easily cleanable, the stainless steel servo gearmotors were developed to withstand high-pressure cleaning, even at high temperatures and with chemical cleaning agents. The drives reach a degree of protection of IP69K.

Standard displays Standard displays are the perfect solution in many areas. You combine your individual design with existing die-cut designs and benefit from this low-cost version. Here is a selection of what we have available. Our employees are on hand to answer your questions and provide further information.

Every success begins with an idea. That's why norelem is there to support you with an unrivalled selection of standard parts and components so that you can achieve your machine and plant construction objectives. The BIG GREEN BOOK offers designers and technicians an extensive and clearly arranged assortment of quality components. We can support your project right from the start with expert advice, a complete CAD database and fast delivery. For over 60 years, norelem has been on the path of constant development – always adding to our portfolio and continuously optimising logistics.

Huge and simply ingenious! Your product will make it big with our large-format displays. These gigantic advertising media guarantee you will grab the customer’s attention. There are barely any limits to size. The displays are easy and safe to install thanks to a cleverly devised installation system on the back. We produce your designs in offset print to ensure top-quality printing results. Film lamination brings charisma to your product while offering additional protection.