Exhibitor products

SCARA-Robots SCARA robots are often used for the fast removal and movement of workpieces, smaller assembly applications such as screwing, and for the precise dosing of liquids, adhesives and sealants. Cost-effective IXP series Adopting stepper motors in the IXP series allows much lower necessary investments than for conventional models. The IXP-series achieves a payload equivalent to that of conventional models by using high-output drivers. All IXP models are equipped with battery-less absolute encoders. Robots of this series are lighter than conventional models and they are available with either 3-axis or 4-axis with an already installed electrical gripper. IX SCARA-Robots for high performance IX SCARA-robots have the best performance in their class in terms of high speed performance, payload and positioning repeatability. In addition to standard versions, there are also ultra-compact models and high-speed types available. Special designs for normal and inverse ceiling or wall mounting complete this series. Robots of this series achieves high speed, payload and precision. The very easy programming makes these robots much more user-friendly and completes this with a wide variety of arm lengths, ranging from 120 mm to 800 mm

SCHRAML IoT Komponenten und Fernwirkstationen ermöglichen die zuverlässige und sichere Anbindung verteilter Außenbauwerke an das zentrale Prozessleitsystem – für jede Anwendung und jeden Datenübertragungsweg (z.B. Mobilfunk 4G, DSL, LAN, SHDSL, LTE-M etc.). Unsere Fernwirktechnik steht für Ihr PLUS an Datenspeicher und Datensicherheit auch bei unterbrochener Übertragung zur Zentrale. PLUS direkter Querkommunikation zwischen den Fernwirkstationen für schnelle und ausfallsichere Steuerungsprozesse. PLUS anlagennahe Bedienung dank HMI Touchpanel-Anbindung direkt an der Fernwirkstation. Wir unterstützen alle SPS-Kopplungen (alle Hersteller, TCP/IP, Modbus TCP, M-Bus, IEC 60870-5-104, OPC UA) oder können mit CODESYS IEC-Programm auch selbst als SPS fungieren. Unsere Fernwirk-Kraftpakete FWL 555 und 550: Für Fernüberwachung und Steuern (SPS) in einem, aber auch zum flexiblen Koppeln fremder SPSen. Mit integriertem LTE-Modem, VPN Router (z.B. SPS-Fernprogrammierung, Webcam-Anbindung), 8 DE oder sogar 16DE, 8DA, 4AE onboard und mit externen I/Os flexibel erweiterbar. Optional mit automatischer Ersatzwegschaltung zwischen DSL und LTE als „doppelter Boden“ für die Daten- und Störmeldeübertragung zur Zentrale. Der FWL 520 LTE-Router mit Fernwirkfunktion – die Komponente für den kostengünstigen Einstieg in die Fernwirktechnik. Koppeln Sie mit dem FWL 520 LTE-/VPN-Router alle SPSen über TCP/IP und verlassen Sie sich dabei auf die bewährte Sicherheit einer Fernwirkstation mit Datenzwischenspeicherung über mehrere Tage und LTE-Datenübertragung zum Leitsystem.

More New, more products, more packaging - all in one edition.

The Smart Dot 50 Standard Touch Button combines modern touch operation with powerful multicolor signaling in a compact device. As part of the Smart Signaling 50 platform, it offers an efficient solution for industrial applications where operation and visual feedback seamlessly interact. The capacitive touch button enables reliable and intuitive operation. At the same time, integrated LEDs provide a clear visual status indication. With up to 6 colors and various light modes, the device can be flexibly adapted to different requirements. High light output and excellent color brilliance ensure optimal visibility, even in challenging environments. Thanks to M22 single-hole mounting and an M12 connector, fast and easy installation in line with plug & play is guaranteed. Designed for industrial use, the touch button stands out with its robust design, high protection rating, and wide temperature range. The Smart Dot 50 Standard Touch Button is ideally suited for applications in mechanical engineering, automation, and control cabinet construction, where clear signaling and intuitive operation are essential.

SDEX Suite is an industrial OPC UA and MQTT data aggregation platform that securely aggregates and distributes PLC and CNC data to IT systems. This OT/IT data aggregation middleware enables scalable industrial data connectivity across Windows, Docker, and gateway deployments.

EUCHNER combines its proven and robust safety switches and safety gate systems with the advantages of safe, standardised communication via IO-Link Safety. Thanks to comprehensive data availability, the products enable easy installation, maintenance and smooth device replacement. You benefit from: - Secure identification and transmission of the actuator ID and key data (SIL3 / PL e) - Uniform interface for switches, interlocks and safety gate systems - Reduced planning and installation effort - Fewer switch variants thanks to flexible conversion of the coding level via the IO-Link setup - Easy device replacement - Detailed status and fault diagnosis in real time

When something needs to be lifted, a crane, ropes or chains are needed – plus anchoring points on the load itself. Ganter offers a wide range of solutions here. The classic and simplest lifting points are lifting eye bolts according to DIN 580, which are screwed into existing threads on the load. When threads are not possible, lifting eye nuts according to DIN 582 are used instead. Ganter offers these standard parts in two materials: steel and stainless steel. However, a look in the Ganter portfolio reveals far better and stronger lifting points that are optimized for specific materials and – most important – easier to handle. In particular, the integrated RFID tags are worth mentioning as a special highlight. These make it possible to clearly identify specific lifting points during wear and safety inspections and manage them digitally and without system interruption. Such RFID tags can be found in the lifting eye bolt GN 581 and the lifting eye nut GN 583, for example, which are still able to rotate around their vertical axis even after installation. Both of these options also identify load rings GN 586.1, although here the lifting eye can also be folded down. And thanks to the eye ring with ball bearing, load rings GN 5860 are fully rotatable even under load. Load rings GN 587.1 are not screwed in but welded on. This load ring is also suitable for outdoor applications since the design of the weld-on block permits a closed seam that is safe from corrosion. The ring itself can be swiveled by 180 degrees, and an optionally integrated spring can secure it in any position. The lifting point GN 589 for welding can accept loads from any direction and impresses with its minimal height. This is an extremely important feature when the maximum hook height of the lifting equipment is limited.

SES-STERLING presents its new product: the self-closing textile split braided sleeving PLIOSIL WS. It is distinguished by a new opening system, easier assembly of the electrical harnesses and improved support. Split sleeving with overlap: PLIOSIL WS Its characteristics • material: polyester • colour: black • diameters: from 5 to 50 mm • operating temperatures: -50 to +150 °C • fire resistance: V0 UL94, halogen-free Fields of application • automotive industry • railway industry • electronics industry Special features of the PLIOSIL WS sleeving The product has the particularity of opening while allowing a clean closing thanks to its self-closing system. This new feature makes it possible to improve efficiency. Due to its opening, the sheath allows the assembly and maintenance of electrical harnesses and also branches, while adapting to their irregular shapes without stiffening them. It is possible to assemble electrical harnesses before or after connection.

Ganter’s indexing plunger selection is extremely diverse. And yet the standard parts experts from the Black Forest continue to find new functional niches to fill: indexing plungers with chamfered pins. They are nearly universal elements that can be found anywhere that latching, locking and securing is required: indexing plungers. Despite the diverse range of types and dimensions, they previously all had one thing in common: The latching process typically makes use of a cylindrical hole that is aligned with the plunger pin, allowing the pin to engage without difficulty. For example, when a carriage travels past a latching hole. But there are also cases in which only an edge or a groove must suffice for latching, and it may not even be precisely positioned relative to the plunger pin. For such situations, Ganter has now developed a new type of indexing plunger that can independently latch into edges and grooves. This is made possible by a chamfered plunger pin. When the chamfered pin encounters a raised latching geometry, it retracts and then springs back out again once it reaches the latching point. More information on Ganter standard parts can be found on the internet at ganternorm.com

Cyklop case sealers provide a reliable and efficient taping process and are easy to set up and control. The (semi) automatic box sealers can be operated separately, but can also be perfectly integrated with other Cyklop machines in your packaging line. Semi automatic machine The CT 303 SD is a semi-automatic case sealer suitable for 50 mm PP or PVC tape. The machine is perfectly designed to be placed next to a packing table. After filling the box, the operator folds the flaps and manually feeds the box, after which the machine automatically closes the bottom and top flaps with tape. The machine can be easily adjusted to the required width and height of the box. The side conveyors are driven by one motor to guarantee a simultaneous transport speed and perfect box closure. With the CT 303 SD it is possible to professionally seal thousands of packages per day. For PP or PVC tape 50 mm Top and bottom closure Manual adjustment