Exhibitor products

For every requirement, we offer the right solution in the field of air conditioning devices. Our product range is exceptionally wide, including filter fans, cooling units, air/water heat exchangers, air/air heat exchangers, cooling towers, heaters, thermostats, and hygrostats. Protect sensitive control electronics and reduce costs with Pfannenberg's energy-efficient and user-friendly air conditioning solutions for control cabinets and processes.

Three decisive advantages at a glance 1. FLEXIBLE ThorPak FBI adapts to your needs, not the other way around. The customer-specific dimensions optimize your logistics processes and maximize loading capacity. 2. SUSTAINABLE With 100% recyclable materials and reduced transportation volumes, you reduce your ecological footprint and support your sustainability goals. 3. ROBUST The steel-reinforced construction with robust corner elements guarantees safety for your products and a long service life.

Huge selection of large load carriers in standard sizes + 100% recyclable + 19 standard sizes + Durable due to high quality materials + Up to 80% volume reduction + Available in your corporate colors + Ergonomic handling

The tim®LIFT vacuum hose lifters help with handling tasks, especially where heavy loads have to be lifted or transported. transported. The vacuum hose lifter is a vacuum lifting device for lifting and transporting loads. Whether stacking cardboard boxes, palletising bagged goods, transporting metal sheets or wooden boards, loading barrels or laying stone slabs, tim®LIFT vacuum hose lifters offer a cost-effective and flexible solution for almost all such handling tasks. The holding and lifting process is realised exclusively with the help of vacuum. By using the same operating lever for suction, lifting and releasing the load, particularly fast load handling is made possible. A modular principle consisting of variable basic components that can be combined in many ways makes it easy to adapt the hose lifter to individual requirements. Our tim®LIFT vacuum hose lifters "Made in Germany" are manufactured with high-quality materials throughout and are therefore characterised by a long service life.

The tim®LIFT vacuum lifting beams are used in the handling of various materials, such as metal sheets, wooden panels and plastic panels with different dimensions and weights. However, not only flat but also round materials and special shapes can be realised. Various customer-specific solutions can be created. Standard systems from the basicLIFT product line are available for common applications. For other shapes and weights, please contact our vacuum lifting systems technical team. Core areas of TIMMER vacuum lifting technology are vacuum lifting devices such as: Lifting beams Swivel cross beams Turning beams Coil lifters Battery-operated lifting beams Traverses for porous materials Customised special solutions Advantages of the vacuum lifting technology • Fast return on investment | Due to the lower personnel requirements for handling workpieces and the associated reduction in fi xed costs, as a rule our systems pay for themselves quickly. • Save time through shorter cycle times | In addition, you will determine that signifi cant time is saved when handling the material. Cycle times are shortened through optimisation of workfl ows with the aid of the vacuum lifting systems. • Customised | If required, our systems will be adapted to your specifi c needs and requirements. • Fewer illness-related absences | The operator is spared the heavy lifting, consequently illness-related absences are reduced. Likewise, more pleasant work conditions are provided. • Low-maintenance / reliable | The devices are low-maintenance to the extent possible; by design they are robust and offer a long service life. • Material-friendly transport | Thanks to optimally confi gured vacuum grippers handling is extremely gentle on materials.

TKHP SERIES “THE GRIZZLY” High-Performance cable carriers for long travel lengths and high additional loads Our new TKHP series is a reliable and efficient cable routing for high-performance applications with travel lengths up to 1.500 meters in rough conditions, such as port cranes or the transport of bulk materials. It can absorb a high level of force, is highly durable and dirt-resistant. 1. Aluminum stays available in 1 mm width sections 2. Plastic chain link plates 3. Quick and easy opening to the inside or outside for cable laying 4. Cable-friendly interior – no interfering edges 5. Fixable dividers 6. Dividers and subdivision for separating the cables 7. Replaceable glide shoes for increased service life in gliding application 8. Robust, multiple stop system 9. Steel installation ¬brackets 10. With integrated roll for standard guide channels 11. With roller damping Features: - Massive, enclosed, stain-repellend stop system - Massive sidebands through robust double ¬fork-bracket-construction - Sidebands easy to assemble - Reinforced symmetrically arranged pin bore connection for better force transmission - Integrated noise damping - Quick and easy opening to the inside or outside for cable laying - Soil-resistant outer contour - Easy change of components - Maintenance-free - Linear force curve in the sideband - Quiet and low-wear operating through polygon-optimized contour and radii - Reduce drive power through less friction

An increasingly faster-paced world, calls solutions with maximum efficiency and 100% safety. That's why we have developed pluggable systems for fault-free electrical installations that fulfil all the requirements of tomorrow's building technology. Installers benefit from the simple expandability of our systems, which meet the highest quality standards. With our Plug & Play solutions, you can make your electrical installations fit for the challenges of the future. Our range now includes TKS empty housings for mounting up to 26 adapter frames for WINSTA® connectors as well as various adapter frames. This means that sub-distribution boards as well as small control and switching tasks can be implemented quickly and easily. Available in various dimensions, the enclosure reliably supply connected smoke detectors, balcony door contacts, loudspeakers and lights with power and signals. That means summed up: Massive time savings High system security Easy installation and maintenance Maximum cost-efficiency

For years, TOC connectors by Telegärtner have proven themselves in harsh environments. Ordinary IP67 rated industrial connectors offer protection against ingress of dust and moisture for indoor applications, but in outdoor applications there are additional, tougher conditions ordinary industrial connectors cannot support. Outdoor connectors have to be – weatherproof – frost-proof – UV-resistant. And they have to be absolutely water-tight to withstand continuous rain and submersion in puddles or mud. These require an IP68 rating.The robust housing made of nickel-plated brass is tough yet easy to install – closing, sealing and locking with just one twist. The stainless steel TOC series takes connetions to a new level. It offers all the benefits of the proven TOC connector series with nickel-plated brass housing and adds a lot more: The stainless steel housing (material quality 1.4404) is designed for extreme conditions. TOC stainless steel connectors are: • free of death space and easy to clean due to its smooth surface • for areas with high hygienic and cleaning requirements • acid-resistant • corrosion resistant even against salt water • lubricant free • highly abrasion resistant • free of welds • IP69K rated • field assembly with 100 screwing cycles. Typical Applications for Stainless Steel TOC: • Connection of outdoor access points or outdoor cameras • Connection of machines and systems in harsh environments (e.g. controls in tunnel construction, mining or on heavy construction equipment) • Connection of machines and systems with special hygienic requirements like in the food industry If a low IP code is sufficient, our more cost-effective nickel-plated brass version is a good choice. It is not only weatherproof and frost-proof, but also UV-resistant. In our standard portfolio, the brass version is also available with MPO/MTP®.

Latch-type toggle clamps, such as vertical and horizontal acting toggle clamps, have been a permanent feature of the Ganter product range for over 30 years. The expansion of both toggle clamp genres make them the ideal solution for an even wider range of applications. Safety hooks keep the toggle clamp closed securely GN 820.3 horizontal acting toggle clamps and GN 851.3 and GN 852.3 latch type toggle clamps provide a new function: an additional lock prevents inadvertent detachment caused, for example, by vibrations or incorrect operation. When the toggle clamp is closed, the additional safety hook automatically locks and holds the lever in a closed position. The spanner can then be opened, or rather, detached through a simple one-hand operation. The safety hook on the horizontal acting toggle clamps is operated by the index finger, while for the latch type toggle clamps it is opened by pressing from above with the thumb. Now including spindle assembly with rubber tip As previously, Ganter’s horizontal and vertical acting toggle clamps leave no wish unfulfilled: we offer horizontal or vertical mounting bases, as an assembly kit or as a U-bar or solid bar versions. These components have long served as reliable standard parts. The possibility of including an adjustable spindle with a rubber tip is a new option. Until now, these had to be ordered separately as an accessory, for example as the GN 708.1 standard part. The spindle assemblies included in the set correspond to the standard sizes most commonly used – should a specific configuration be required, this can of course be ordered separately. Along with the toggle clamp versions with additional locking as described above, spindle assemblies are also available for GN 810 (vertical acting toggle clamps), GN 812 (with dual flanged mounting base), GN 820 (horizontal acting toggle clamps), as well as for the GN 860 (pneumatically operated spanner) models. Find out more at www.ganter-griff.com

Two-in-one labeling solution: - A variety of optional modules for any labeling task - Equipped with the HERMA 500 - Top and bottom labeling in one cycle - Easy to integrate into any kind of production line - Extremely efficient and highly productive - Space-saving, compact and hugely versatile - Also suitable for top or bottom labeling only

eparation and provision of pre-cut compression pads. The compression pads are picked up and applied to the battery modules by an on-site vacuum handling system. Features topex special label dispenser with servo drive Motorised large roll unwinding Motorised retractable dispensing edge for separating the compression pads Roll outer diameter 700 mm Core diameter 10" Siemens S7-1500 controller integrated in control cabinet

Discover the whole range Unsurpassed versatility and compact design. The 7000 series is the right solution when great application flexibility is required and the highest demands are placed on labeling system. Whether for text, barcodes, 2D codes or graphics – top quality applies across the board. Reliable and safe – with thermal transfer printing technology.

The IO-Link-capable load monitoring system topGUARD offers remote control options, full data transparency, and reliable protection of the 24 V system voltage. It is an outstanding supplement to the IO-LINK-capable PROtop power supplies. • Data transparency and remote control due to IO-Link • Maximal flexibility thanks to a modular system • Voltage-adaptive load monitoring according to Class 2 • Time and cost savings due to an integrated distribution of potential • Simple migration from maxGUARD to topGUARD