Exhibitor products

The PicAS II EBS-1600 from EBS Ink-Jet Systeme is a state-of-the-art drop-on-demand marking system designed for industrial applications. This large-character printer combines many years of expertise in piezo inkjet technology with robust engineering, high flexibility and ease of use. Thanks to its robust construction and IP54 protection rating, the system operates reliably even under demanding conditions – such as in the presence of dust, moisture or temperature fluctuations. A shock-resistant print head further ensures high operational reliability in everyday production. The modular design allows for the separate installation of the print head and controller, facilitating integration into existing production lines – even where space is limited. E-Link technology combines power supply and data transmission in a single cable, thereby reducing cabling requirements. The cartridge-based ink system also eliminates the need for ink lines, simplifying maintenance and cleaning. Another advantage is the quick commissioning: the pre-configured system is ready for use in less than ten minutes without the need for a technician or special tools. Cartridge replacement is clean and takes just a few seconds, minimising downtime. The system is operated via a 10.1-inch TFT touchscreen with an intuitive user interface and graphical print preview. Key information such as ink levels, production data and system status can be clearly viewed at any time. Multiple user and access levels also allow for customised rights management. Various printhead variants and a 5-stage adjustable printhead system are available for different applications. Furthermore, the PicAS II EBS-1600 can be easily integrated into production lines, databases and existing IT structures, thereby supporting modern, networked manufacturing processes.

LinMot's Pick & Place modules are standardised multi-axis systems consisting of the proven DM01 and DM03 direct drives, which act as dynamic X and Z axes. Both axes can be controlled independently of each other, enabling highly flexible pick & place applications. Precision shafts guided by linear ball bearings ensure accurate linear motion. The rounded surfaces of the housing also facilitate maintenance and cleaning of the modules. Thanks to the choice of materials and design principle, the drive units have a high bending stiffness with a comparatively low moving mass. The DM03 modules are equipped with a MagSpring® to relieve the vertical axis and passively compensate for the resulting weight. In terms of performance, users benefit from a force range of up to 360 N and strokes of up to 275 mm. With accelerations of up to 50 m/s2 and a maximum speed of 7 m/s, the required applications can be implemented very dynamically. Each pick & place module is delivered to the customer fully assembled and does not need to be assembled from individual parts. In addition, the modular design of the system allows it to be quickly adapted to customer requirements. The 'LinMot Designer' simulation software, available online at any time, ensures the correct selection and design of the modules. Plug and play technology allows the user to put the system into operation immediately. The required type parameters do not have to be selected manually, but are read in automatically by the servo drive.

The cell processes KLTs ranging in size from 300 × 400 × 70 mm to 600 × 400 × 320 mm with a handling weight of up to 50 kg. The maximum stacking height, including floor rollers (400 x 600 x 160 mm), is 1,350 mm. The small load carriers (KLTs) are handled at approximately 400 cycles per hour. With a double handle, up to 800 KLTs per hour are possible. Sliding doors made of safety glass ensure optimal accessibility with minimal space requirements, complemented by an integrated AGV safety gate. Reversing the process flow is also possible, allowing the cell to be used for the automated loading of floor trolleys.

piPREMIUM 600-1600 is a line extension of the previous piPREMIUM family which has been available in size 100-400. The target for the extension is the food and pharma industries who need higher capacity.

The PilotOne is the most revolutionary scrubber the market has to offer. With its innovative technology, it sets new standards in the cleaning industry. Equipped with a separate chemical tank, the PilotOne saves water for cleaning the solution tank, thus optimizing resource utilization. An integrated drainage pipe allows for easy and convenient emptying of the wastewater tank without the need for removal. Thanks to its multi-device management, the PilotOne offers a variety of functions, including positioning, remote locking, error reporting, cleaning area counting, and the generation of cleaning reports. Additionally, it enables real-time availability of staff operational information, ensuring efficient and transparent workflow.

PKP Series – High-Torque Stepper Motors for Precise Positioning The PKP series features powerful 2-phase and 5-phase stepper motors, characterized by high torque, low vibration, and quiet operation. They are ideal for applications requiring high precision. 2-Phase Stepper Motors • Basic step angle: 1.8°; M-type motors available with 0.9° basic step angle • Higher torque thanks to optimized magnetic design • Low vibration due to redesigned structure • Frame sizes: 13, 20, 28, 35, 42, 56.4, and 85 mm • Flat Type motors additionally available in 42 and 60 mm; also with Harmonic Drive® gearheads • Neugart planetary gearheads (PLE) available for 42, 56.4, and 85 mm • Encoder options standard: 200, 400, 1000 P/R; semi-standard options up to 4,000 P/R on request • Spur gearheads (SH type) available • Optional electromagnetic brake to hold loads in vertical applications 5-Phase Stepper Motors • Basic step angle: 0.72°; M-type motors available with 0.36° basic step angle • Finer step resolution with even lower vibration and noise • Frame sizes: 20, 28, 42, 56.4, and 85 mm • Encoder options standard: 500, 1000 P/R; semi-standard options up to 4,000 P/R on request • Spur gearheads (SH type) available ------------------------------------------------------------------------------------------------------------- Common features: High precision, versatile applications, and easy integration.

Our premium planetary gear units paired with our high efficiency helical bevel gear units. The result: STOBER right-angle planetary gear units! If the motor in coaxial design represents an interference contour, the combination of a STOBER planetary gear unit with a bevel gear unit is the best choice for the highest demands on dynamics, backlash stability and robustness.

With the planetary gearmotors of the THETADRIVE 22-42 and DCPM 16-77 product families, Gerdt Seefrid GmbH in Bad Vilbel sets standards in terms of selection, flexibility, and price/performance ratio. Planetary gearmotors offer designers decisive advantages in some applications. For example, the output shaft of the gearmotor is aligned with the motor shaft connected to the gearmotor input, and the gearmotor volume – measured in terms of the transmittable power – is smaller than with other gearmotor designs. The range of mounted gearmotors in each series includes a variety of reduction ratios. This means that a suitable planetary gearmotor can be found for almost any speed requirement within the limits of technical possibilities. Depending on the series and voltage, no-load speeds from 3 to 3000 revolutions per minute are possible. All data sheets with detailed information on the series presented here, 3D step data, and additional information are available on the website.

Project planning is the cornerstone of a good and successfully implemented application. Here all important technical details are discussed and solutions are worked out for the specific customer and solutions are worked out. Our well-trained staff and the certification according to DIN ISO 9001:2015 provide the security in the planning process that complex projects require. require. The main tasks of our project planning team are: - Preparation of project flow charts - Conceptualization of machine safety / risk analysis etc. - Thermal calculation of switchgear - Design of suitable equipment - Circuit diagram creation with EPLAN P8 - Drawing of general and layout drawings - Preparation of terminal diagrams, bills of materials and cable lists - Elaboration of PLC specifications - Assembly planning - Preparation of documentation

OPUS//WMS, as the core module of the OPUS//SUITE, covers all areas of warehouse management. As an inventory management system, OPUS//WMS controls and monitors all warehouse processes, transport, order fulfillment, as well as provision and allocation. Warehouse management from simple manual to complex automatic warehouses with extensive conveyor systems, palletizers, etc. can be implemented with OPUS//WMS. The material flow is optimized and, if necessary, largely automated. In the control center, you keep a complete overview of all processes in the warehouse. The system actively supports you in your day-to-day business and draws your attention to any action required. Evaluations can be visualized at the touch of a button using a configurable dashboard. Selection of functions: - Goods receipt - Goods issue - Order picking - Loading - Packaging and shipping - Multi-storage capability - Multi-client capability - Inventory (cut-off date, permanent, etc.) - Best before dates - Traceability (batches) - Inventory management - Order management - Control center - Quality assurance - Active action notifications - Replenishment - Weight control and restriction - Consignment - Empties and loading aids - Cross docking - Dangerous goods handling - Returns management - Training kit - and much more.

plantPerfect Monitor permanently monitors PROFIBUS networks and devices. It provides an online live view on the network with its devices and stores the information in a database to allow historic views. Geared to plant operators and maintenance personnel, plantPerfect Monitor easily detects the changes happened in the networks.

Popular for their large volume and strong construction. You'll find these pallet boxes in production plants for the storage of heavy parts as well as farming. Our pallet boxes also have many applications for recycling purposes (for example for the collection of batteries, batteries, fluorescent lamps and old paper). Pallet boxes: volume and load capacity Depending on their size, the pallet boxes carry up to five tonnes in the stack and up to 800 kg in the rack. Higher stacking requires less floor space. There is a choice of three bottom versions: four feet: for the agri-industry (the boxes can be stacked without interfering with the fuits or vegetables) two skids: better stacking, also suitable for roller conveyors three skids: industrial use, hig load cpaacity for, for example, the recycling of car batteries or old-paper And four versions of sidewalls: flat inner walls, for industrial use, foldable or in one piece slightly outward bulging walls, for maximum capacity when the pallet boxes are filled with bulk material. Also foldable or in one piece Liquid-tight pallet boxes, both stackable and nestable User-friendly container designed for use in the food, chemical and petro-chemical industry Customer specific An industrial mirror welding machine enables us to weld boxes together in the length and height. This allows us to manufacture extra large pallet boxes, just as strongly as if they were produced in one piece.

Plastic pallets are made with specific properties for specific practices. The possibilities are endless. Choosing the right pallet for your business environment requires some know-how. In short the differences in plastic pallets: - type of material: new, recycled or with additives - different load capacity - single or multiple use - suitable for racks or not - nestable or not The specific applications often determine the type of material. Ultra light export pallets for airfreight (HDPE), slightly heavier export pallets for freight by ships (PO). In addition, completely smooth for use in food and pharmacy. High-capacity pallets for high-rise and freezer rooms. Are plastic pallets better than wood? Yes. Plastic pallets have many advantages over wooden pallets: - plastic pallets don't absorb moisture, don't rot or splinter, so more friendly (more ergonomic) for the user - plastic pallets require no maintenance - plastic pallets look more attractive (for example as colorful display pallets in supermarkets) - plastic pallets have a longer life-cycle (broken; shredding and re-injection molding)