Exhibitor products

With axle speeds of up to 1,000 degrees/s the MOTOMAN GP4 is repeatability agile and ultra-fast. Its outstanding repeat precision of +/- 0.01 mm makes it suitable for many automated applications that call for the highest degree of precision with small workpieces, e.g. flexible handling and feeding of small parts, assembly, loading and unloading of machines or time-critical inspection tasks. In addition, the compact robot is characterised by a small footprint and attractive price-performance ratio. Part of the MOTOMAN GP series: Like its big brothers of the MOTOMAN GP series, the GP4 offers all advantages of this class. “GP” stands for “General Purpose” and thus suitable for a wide range of uses. The 6-axis robots are designed in conformance with high Protection Class IP67 (special protection against the penetration of moisture and dust). They can be deployed in harsh working conditions and are easy to clean. The robot can operate without restriction in any position; the robot cables can be inserted either sideways or through the base. The integral media supply in the axes optimises the setup of grippers and ensures the highest degree of reliability in operation. Wide range of applications in small parts handling: Due to its small space requirements, the GP4 is particularly suitable for use in the electronics industry. In the assembly of precision modules, the GP4 is at least equal to a fast rotary transfer machine. And as a 6-axis robot it is predestined for modern, flexible pick & place small part feeding with vibration plate and image processing. And last but not least, the attractive price and compact size makes the versatile GP4 6-axis robot an interesting alternative to conventional automation with Cartesian motion systems.

Hygienic handling robots for the life sciences sector. The robots in the new MOTOMAN HD series (HD stands for “Hygienic Design”) are able to carry out a wide range of handling tasks in hygiene-sensitive areas including laboratory automation, the pharmaceutical sector and the food industry. They fulfil the stringent requirements of sterile and cleanroom environments: in addition to being suitable for use in hygienic areas up to the highest cleanliness level of GMP Class A in accordance with EHEDG, EN 1672-2 and ISO 14159, they also comply with cleanroom class in accordance with ISO 14644-1, cleanroom class 5 in the case of the HD7 and cleanroom class 4 in the case of the HD8, according to the measurement and evaluation procedure defined in ISO 14644-14. The new series is launched with the MOTOMAN HD7 and HD8 models, offering a payload of 7 kg and 8 kg respectively. They are manufactured at the Yaskawa plant in Kočevje, Slovenia, which is also where they were developed. The MOTOMAN HD series is based on the 6-axis high-performance robots of the well-established MOTOMAN GP portfolio. Like the MOTOMAN industrial robots, they utilise Yaskawa’s latest Sigma 7 servo drive technology, achieving an extremely high level of performance in terms of movement, acceleration and precision. The movement range of axis 1 is +/- 180°. The robots can be combined with the universal YRC1000 robot controller or the YRC1000micro compact controller, both of which offer a wide range of modern options in terms of control, communication, safety and software.

New to Ganter’s product range: Mounting clamps with swivel ball joint for precise adjustments with high stop torque for low torque power as well as the option of customer-specific adaptations. For some time Ganter has offered axial ball joints under standard GN 782 that are particularly suitable for smaller installation spaces. These joints can be mounted with a knurled union nut if a lower stop torque is required, while a higher stop torque can be achieved with an open ended wrench. Ganter has now introduced the GN 784 mounting clamp with swivel ball joint series for applications which require a higher stop torque while. The new mounting clamp provides a larger rotating range of 360° around the vertical axis, thereby ±90° of the position predetermined by the swivel ball joint and ±30°of tilt angle in every position. The joint is therefore ideal for the adjustable assembly of cameras, lighting objects, air nozzles, monitors or scanners. The swivel ball joint mounting is as easy as it is ingenious: a screw with a cone tip which is operated through an adjustable hand lever or with an internal hexagon moves the casing downwards and presses the ball into the pan-shaped base element. The high effectiveness of the clamping mechanism allows for high retaining powers to be achieved on the ball with a small tightening torque. In addition, the combination of the material surfaces between the ball and casing (aluminum, black – anodized) contributes to high friction within the fixed joint. For clamping with infrequent adjustment the hand lever can be omitted and the internal hexagon threaded stud option used instead. GN 784 mounting clamps come in four sizes, with the ball joint available in a tapped thread or threaded stud type version. Customer-specific swivel ball joint connections can be supplied economically even in comparatively small unit quantities.

Our FLEX IMPACT® movable barriers provide optimum safety and visibility in locations where forklifts, lorries, bulldozers and other vehicles manoeuvre. Made of impact-absorbing polymer and in a striking yellow colour, they effectively signal obstacles and indicate the direction of travel. Easy to install and move, they are durable and weatherproof. The design with rounded shapes minimises the risk of injury. UV-resistant, non-conductive and resistant to most chemicals, these movable barriers are a reliable solution for safe and efficient traffic flows.

MOVI-C®, the modular automation system for all-in-one solutions from a single source MOVI-C® is the all-in-one solution for automation tasks. Whether you want to implement standards-based single-axis or multi-axis applications, particularly complex motion control applications or customized automation solutions, MOVI-C® can help you do all that and give you the scope to achieve optimum automation for new projects. Your benefits: MOVI-C® is the all-in-one modular automation system from SEW EURODRIVE. This end-to-end solution from a single manufacturer covers all your needs – planning, commissioning, operation and diagnostics software, electronic control and monitoring devices, mechanical drives and gearmotors. There is only one place you have to go to for all the automation components you need. Naturally, all components can be fully integrated into all automation concepts, fieldbus topologies and network standards. You have complete freedom when it comes to the communication topology, as MOVI-C® harnesses all communication advantages – from PROFIBUS and Industrial Ethernet to Modbus and, in the future, OPC UA. MOVI-C® offers automation and a whole range of benefits from a single source – specifically, a company that is both an automation specialist and a manufacturer. The four components are: - Engineering software - Control technology - Central and decentralized inverter technology and - Drive technology and - Power and energy solutions Together, these components form one complete, end-to-end modular automation system made up of devices and field units that you can combine to suit your requirements and bus topology perfectly.

Movinor low voltage servomotors, T series These brushless synchronous servomotors with 6-pole stator have been completely redesigned and designed. The modern concept of the magnetic circuit, the winding and the insulation creates torque reserves and increases the service life considerably. A wide range of options is available as standard for the entire motor family, including additional mass inertia. If required, customer-specific adaptations are also possible. Movinor Low Voltage Servomotors, N Series These motors with stators designed using pole winding technology are extremely compact. Thanks to constructive optimizations and the use of stronger magnets, the power density could be improved by up to 40% compared to the T series, depending on the flange size and motor length. A large number of options are also available here, but less extensive than with the T series.

The synchronous servomotors of the series MOVINOR LN are brushless permanent magnet synchronous servomotors with sinusoidal back EMF and with neodym permanent magnets at the rotor. Therefore they are particulary suitable for high-quality servo applications, for example positioning demanding high standards of dynamics and accuracy. The new concept of the LN series optimizes the heat dissipation and improves the magnetic flux inside the motor. The modern segment winding technology with also reduced size of lamination accomplishes a servomotor with an outstanding ratio of torque / volume-content.

The new MP8(4) is an especially practical RJ45 plug with four contacts for PROFINET applications. It can be assembled using the same tool as the proven 8P8C Cat.6A RJ45 plug. Telegärtner is expanding its range of RJ45 plugs with an 8P4C version for PROFINET applications. PROFINET patch cords have long been part of the product portfolio. As part of the plug‘s design optimization, Telegärtner decided to offer the PROFINET plug now as a standalone product as well. The new MP8(4) for PROFINET is assembled in the same way as the proven Cat.6A RJ45 plug MP8(8). The same crimping tool, the same crimp insert, the same strain relief boots – with our comprehensive product range, we make the assembly of two pair and four pair Ethernet cables as easy and efficient as possible for cable assembly houses. The new plug thus benefits both cable assemblers and users who want to assemble their own patch cords. The wire manager accepts AWG22/7 and AWG22/19 wires with an outer diameter of up to 1.6 millimeters. The plug is suitable for data rates up to 100 Mbit/s and Power over Ethernet Plus according to IEEE 802.3at. Telegärtner’s MP8(4) complies with the PROFINET Installation Guideline and is UL listed, which is important for exporting machinery and industrial plants. The new plug is available from stock.

The MRAT lateral diverter is designed to smoothly divert unit loads weighting up to 250kg. With its compact cassette design, it can be integrated in any type of new or repurposed conveyor frame, serving up to 3 exits. Fully powered with 24Vdc without any pneumatics, to drastically simplify integration into a safe conveyor application and increase reliability while limiting the need for maintenance. The MRAT can be used in cold environment, up to -30°C.

MRC01/MRCU Robot Controller – Overview The MRC01 is a versatile robot controller designed to integrate in-house developed robots into existing systems. It allows simple programming and control via EtherNet/IP™ and communicates with AZ Series motors and actuators through RS-485. The MRCU builds on this concept as a compact plug-and-play solution, integrating the drivers for AZ motors (DC power) directly into the controller housing. This eliminates the need for external driver modules, reducing wiring complexity and installation time. Key Features • Easy integration: Direct connection to host systems via EtherNet/IP™ or I/O interface • Multi-axis control: Supports up to 8 axes (one robot per MRC01/MRCU) • User-friendly programming: Intuitive program creation with MRC Studio software, no ladder logic required • Compatibility: – MRC01 works with AZ Series motors/actuators (AC or DC) via built-in controllers or external mini-drivers through RS-485 – MRCU combines DC drivers and the robot controller in a single plug-and-play unit • Robust control: Closed-loop operation for precise motion control • Flexible applications: Suitable for articulated robots, SCARA, and delta robots System Configuration • Communication: EtherNet/IP™ for host system connection • Control: RS-485 communication between MRC01/MRCU and AZ Series motors/actuators • Software: MRC Studio for simple programming, simulation, and debugging

MSB nova® is mobisys' Clean Core-compliant and SAP-certified solution for modern, mobile SAP processes. Quick to implement thanks to plug & play, ready-to-use templates, and an integrated development environment. Optimized for SAP EWM, it reduces errors, speeds up processes, and creates real-time transparency. Platform and device independent, internationally scalable, flexibly configurable, and with regular updates for stable operation.

Due to the direct Integration with the SAP system, the Mobisys Solution Builder (MSB) makes it possible to access all SAP modules. This is used to great advantage by our customers, who can build mobile applications based on the MSB standard transactions, with which mobile processes can be implemented easily and rapidly. These can be directly used in your projects in a productive manner and can be enhanced or changed with little effort. MSB standard transactions support frequently used business processes in the following areas: Inventory management Warehouse management Shipping Production Plant Maintenance Develop transactions and applications yourself using the MSB Developer Kit Many branches and firms have their own requirements and business processes. If these are not reflected in the MSB standard transactions, in most cases the MSB standard transactions can be used as the basis for developing or enhancing your own mobile applications. This considerably speeds up project implementation and effectively lowers development and implementation costs of mobile applications. Using the MSB Developer Kit you can develop your own, brand-new transactions and applications with very little effort. For this, all you need is a knowledge of ABAP programming. For the display of mobile applications on mobile and stationary devices, you also need the MSB Client (Windows) or the MSB App (iOS, Android, BlackBerry).