Exhibitor products

'CKN' is the production series which grants customers a maximum of application liberties. The flange mounting offers manifold possibilities to establish a connection with the element or add hubs, flanges and fittings. Depending on the chosen model, CKN has been designed for very high torques of up to 5,000 Nm.

EGE Metalldetektoren System 3000 erfassen zuverlässig Metallteile im Fördergut auf Transportbändern. Das System 3000 besteht aus einem Auswertegerät und einer kompakten Detektorspule. EGE-Metalldetektoren erkennen die schädlichen großen Metallteile und sind gleichzeitig unempfindlich gegenüber kleineren harmlosen metallischen Verunreinigungen des Fördergutes. Das System blendet statische Metallteile, wie sie etwa in der umgebenen Konstruktion verbaut sind, automatisch aus. Die Geräte sind klimawechselfest, wasserdicht und für den Einsatz im Freien konzipiert - etwa auf mobilen Anlagen. EGE-Metalldetektoren schützen zuverlässig Steinbrecher, Müllpressen, Mühlen und andere Verarbeitungswerke, die durch größere Metallteile beschädigt werden könnten.

Designed to transport heavy automation equipment, MHD track roller system accommodates high offset and overhanging loads, and is ideally suited to be used as a 7th axis robot transfer. 7th axis robot transfer – MHD track roller system easily accommodates high offset and overhanging loads up to 136kN, making the system ideally suited to being used as a 7th axis transfer system for robots. Enhanced strength in downward direction – For larger robots with high emergency stop loads, a version using three taper roller bearings is available boosting strength in the downward direction. Hardwearing – Large wheels with axial capacity make the system tolerant of debris, misalignment, disturbance to joints and accidental damage. Low maintenance and durable – Sealed roller bearings are combined with hardened and precision ground flat tracks providing a reliable and low maintenance solution for heavy loads. Simplified installation – The lower bearing wheel of each block can be easily removed, allowing easy assembly onto the tracks by lowering the carriage from above.

Current monitoring modularized to the maximum extent Mico Pro is the new and innovative current monitoring system from Murrelektronik. The modular system enables you to adapt systems precisely to suit specific applications – offering a favorable cost-benefit ratio while also being economical in their use of space. The patented tripping process assures optimum machine availability. Mico Pro monitors load and control currents and identifies critical moments. It signals limit loads and switches defective channels off in a targeted manner – according to the principle of “as late as possible, as early as necessary.” Mico Pro is a modular system for 12 and 24V DC operating voltages. Components can be selected for the particular application from numerous Mico Pro modules. You can select between modules with one, two or four output channels. The tripping currents are fixed (2, 4, 6, 8, 10 and 16 A) or can be flexibly adjusted from 1 to 10 A or from 11 to 20 A. Mico Pro has an integrated potential distribution concept for +24 (or +12) and 0V that significantly simplifies switch cabinet wiring. There are connection options for +24V and 0V on each channel. The innovate bridging system consisting of two bars and lateral spring contacts for connecting diagnostic and control signals is easy to handle. It is designed for a total current of up to 40A. All inputs and outputs of the system are provided with push-in spring clamp terminals. Great importance is attached to the diagnostic functions of Mico Pro. Each channel is equipped with an LED for status indication on the device and digital status signals can be transferred to the PLC. A channel-specific switching function via an PLC signal allows the Flex modules to switch system components on and off without any additional contactors, relays, or optocouplers. Not only short switching frequencies (of up to 10 Hz) but also longer frequencies can be realized. Mico Pro can be cascaded. This means: on a Mico channel, another Mico Pro station can be connected.

Small switch with large impact: The tactile switches of the MICON 5 family convince with an extraordinary tactile feedback. The integrated gold contacts guarantee reliable key operation. Thanks to the increased IP protection class, MICON 5 S (Sealed) tactile switches can be used on printed circuit boards that are made robust against environmental influences or contamination by using potting, dip coating or conformal coating. In combination with the extensive range of accessories, the MICON 5 becomes a universal solution for almost all applications. Various lengths, designs and variants with illumination options are available. - Special tactile feedback - SMT or THT version - Automatic assembly - Various actuation forces - Accessories range with plungers and key caps

Intelligent, compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 5.6 A (4ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (CZ-CAT) or CAN/CANopen (CZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm

Intelligent, ultra compact and freely programmable motor controller Brushless rotary and linear motors, voice coils and DC brushed and stepper motors Motor supply / logic supply: 7 – 48 VDC / 6 – 48 VDC Output current: 4.2 A (3ARMS) nominal; 14 A (10ARMS) peak Communication via RS232, USB + EtherCAT (MZ-CAT) or CAN/CANopen (MZ-CAN) Size (L x W x H): 38.1 x 25 x 9.5 mm

MICROSENS develops its own hardware and software components for fiber optic transmission systems and building automation. Working directly with customers and users, it creates IP-based automation solutions for modern buildings, cost-effective network concepts for offices, robust solutions for industrial environments, optical transport systems for future-oriented wide area networks, and reliable connections between sites and data centers.

Whats behind the Mini Bunker/Hopper? At our booth 427, well be presenting a new exhibit from our partner NetterVibration. We look forward to your visit.

An environmentally friendly alternative to conventional packing tape • Environmentally friendly: made from renewable resources and recyclable with the cardboard • Reliable: secure closure • Strong adhesion: optimal initial tack and long-lasting bond • Durable: resistant to temperature fluctuations from -15 °C to +60 °C • Writable Material: Kraft paper. Roll core diameter: 76 mm. Natural rubber adhesive.

Easy to use, well protected and considerably more compact - the HARTING Technology Group is expanding its proven PushPull connector series. The new Mini PushPull represents the waterproof and dustproof version of the ix Industrial® Gbit Ethernet Interface. The perfect choice for fast and reliable data connectivity in demanding industrial environments and applications exposed to the elements. Introducing new Mini PushPull series, HARTING is now providing the ix Industrial® Ethernet interface for 10 Gbit Ethernet with Cat. 6A performance in a waterproof and dustproof version. Standardised according to IEC/PAS 61076-3-124, the ix Industrial® mating face in the Mini PushPull stands for absolutely reliable transmission performance and optional power supply via PoE/PoE+. With a 30 % shorter housing compared to the proven HARTING PushPull RJ45, users benefit from a miniaturised data interface for demanding applications. PushPull is the preferential device connection technology when it comes to outstanding robustness in combination with simple and process-safe operation in waterproof and dustproof design to IP 65 / IP 67. Compact, robust jacks are available for device integration on the PCB, providing maximum stability with five THR shield contacts. The jacks are available in three different versions: 1. horizontal jack 2. angled vertical jack 3. vertical jack All jacks are optionally available in the A and B codings for Ethernet and signals. The data contacts are designed as SMD contacts. This allows device manufacturers to process the PCB jacks according to the normal reflow soldering process. The Mini PushPull add-on housing, which fits all matching jacks, is mounted in front of a rectangular mounting cut-out during device integration and connects the PCB jacks providing IP 65 / IP 67 protection to the outside world.