Exhibitor products

The use in hazardous areas places high demands on the components installed there. For this reason, PFLITSCH offers a comprehensive range of cable glands that covers a wide variety of requirements and aspects. All cable glands are certified in accordance with the current ATEX directive (ATEX=Atmosphère explosive) for the application areas G (Gas) and D (Dust) in equipment class II and in the ignition protection types e (increased safety) and d (flameproof enclosure). Different versions are available if special protection against electromagnetic interference or a hygiene-compliant design is also required.

Vorteile der Protecta X LED: Revolutionäres Design, um Vorteile der LED-Technik voll auszunutzen Lumen Output 2696lm oder 5230lm Betriebsdauer > 120.000 Stunden bei 25°C Marktführende Effizienz von 135 Lumen per Watt Benutzerdefinierte Lichtverteilung durch Linsentechnik 50% Energieeinsparung gegenüber Leuchtstoffröhren Innovativer Akku-Stab für schnelle Installation, ohne das Gehäuse zu öffnen Zertifiziert nach ATEX und IECEx, Zone 1/21

It is often the little things that make everyday work easier. Lo and behold, here comes the multitool - in this form exclusively available at ipf electronic. The small multitool AY000154 fits in every trouser pocket and integrates a total of eight tools, including six Allen keys for fastening the sensors from ipf electronic for querying pneumatic cylinders. Especially the Allen key with 2.5mm is mostly missing in comparable multitools and also the key with 0.7mm is usually not available in most tool sets. If, for example, the potentiometer of an optical sensor needs to be adjusted, it is not necessary to look for a suitable screwdriver, because the multitool also contains two suitable solutions.

• Unitechnik integriert Exotec Skypod-System • Innovation: Lager & Kommissionierung für Kleinteile • Modularer Aufbau für flexible Raumnutzung • Mobile Lagerroboter Skypods, frei beweglich • Skypods erreichen bis zu 12 Meter Höhe • Skypods erreichen bis zu 4 m/s Geschwindigkeit • Skypods sind einzige aktive Lagerkomponenten • Autonomer Transport zu Kommissionierstationen • Vielseitiges Ware-zur-Person-System

WHY UPGRADE WITH EXPRESSO CONNECT The EXPRESSO lift2move (4th gen.) and EXPRESSO eBalancer lifting aids are equipped with EXPRESSO Connect (can also be retrofi tted) to reduce running costs. By retrieving precise information and condition monitoring, predictive maintenance is possible, which reduces maintenance costs, increases the efficiency of the device used and offers the user increased safety. HOW CONDITION MONITORING WORKS? - Capturing real-time data - Intelligent evaluation of the recorded data - Transfer to clear dashboard (in real time) - Better maintenance planning, productivity analysis, safety, operational transparency EXPRESSO lift2move and EXPRESSO eBalancer with IoT-data capturing EXPRESSO Connect ... BENEFITS AND ADDED VALUE? Improved maintenance planning and longer service life Captured data: Operating hours, (motor current), gearbox temperature Benefit: • Early detection of overload or wear • Reduced downtime and repair costs • Longer service life of the lifting aid thanks to preventive maintenance Efficient utilisation and productivity analysis Captured data: Utilisation data, lifting height + travel distance (position encoder/remote control) Benefit: • Optimisation of usage patterns for greater efficiency • Analysing the productivity of individual lifting aids • Reduction of idle times, energy consumption, wear and tear Increased safety and operational transparency Captured data: Temperature, motor current, operating status, serial number Benefit: • Real-time monitoring of safety-critical parameters (e.g. overload) • Traceability of devices through unique (digital) serial numbers • Minimisation of accident risks through timely warning of e.g. overloading • Automated warning messages for individual parameters ... for more

The second highlight on the EXPRESSO stand is the eBalanceLift electronic rope balancer. This ergonomic handling system supports manual lifting, lowering and positioning actions during load handling. It can be installed as a column or rail version. In both cases, the user operates via an operating unit that is fixed to the control head of the eBalanceLift or to the load receptacle and is connected to a servo-motorised hoist via a steel cable. All necessary parameters and programming can be entered directly on the control unit, i.e. without an external computer. A load cell in the operating unit detects the weight of the load and passes on the movements carried out on the unit to the hoist, which supports the user and takes the load from him. Depending on the application, the use of the operating handle can also be dispensed with via the balancing mode integrated as standard. "Regardless of the load weight and without any effort, the user can move loads of up to 600 kg with the eBalanceLift and concentrate fully on handling. This allows him to carry out even positioning, pick-up and delivery situations with high precision," explains Oliver Stauch-Vaupel. In the column version - called ARM - loads with weights of up to 300 kg can be handled with the eBalanceLift via an articulated arm on a column. Here, endless 360°degree manoeuvring of the load is possible, with the articulated arm extending up to 4,000 mm depending on the system configuration. In the RAIL variant, the EXPRESSO eBalanceLift can be combined with all common rail types and used for loads weighing up to 600 kg. The same applies to both the column and the rail solution: the operating head and drive have programmable inputs and outputs, and the control software can be adapted to the customer's individual requirements.

The lift2move is at the heart of operational material flow processes in many industries. It has a lifting mast driven by a brushless electric motor and, depending on the payload and load pick-up, can be used for ergonomic feeding of packaging lines, for safe material feeding and workpiece positioning in assembly or as a convenient warehouse operating device. Now EXPRESSO presents the latest generation of this lifting and conveying system - the lift2move solution. It is offered in four new performance classes for payloads of 130, 180, 250 and 400 kg. The significant quality features of the lift2move solution include its modular design, which forms the constructive basis for its high adaptability to many different applications. Visitors to the EXPRESSO trade fair stand will also be able to see for themselves the ergonomic smooth-running character of the lifting and transport lift. An important part of this is played by the large rear castors and steerable front castors which, thanks to their low breakaway torques, ensure comfortable starting and manoeuvring. All castors are designed for use in workplaces with ESD requirements, and the fact that the front castors can be locked is one of the special features of the lift. The low-slung chassis makes it easy to drive under workbenches, shelving or assembly systems, and the wide lift mast base gives the floor assembly a high degree of torsional rigidity. The wireless battery packs, which can be exchanged in a few simple steps according to the plug&play principle and inform the user about the charging status via a digital status display, prove to be extremely practical in practice. In addition, the lift2move solution has an integrated error diagnosis with visual signalling and an electrical limit switch that offers the user additional safety.

The universal lifting aid for your standard handling equipment

Rotary Encoder – Incremental Feedback Devices for Motion Control Oriental Motor’s Rotary Encoder series includes ultra-compact, high-resolution incremental encoders designed for tight-space installations. Technical Features Housing Types: • Round shaft models in Ø30 mm or Ø40 mm • Hollow shaft models in Ø30 mm or Ø40 mm Resolution Options: 14 options ranging from 100 to 4,000 P/R Output Formats: Line driver, voltage output, or open-collector (5–24 VDC) Physical Specs: Ø30 mm or Ø40 mm, depth 22 mm, weight ~33 g (round-shaft), ~38 g (hollow‑shaft) Signal Outputs: A, B, Z phases for precise position and speed detection IP65 version: round shaft with Ø40 mm, available as Line Driver or Open Collector type Benefits & Applications • Enables detection of rotation differences (belt slippage, pulley deflection) and supports predictive maintenance systems • Very small footprint; ideal for retrofit or space-constrained designs. Mounting adapter (PEF2) simplifies installation on Ø30 mm shafts • Easy mechanical alignment of Z-phase output—Z-signal at 180° from connector orientation

Ruggedized switches that support operations under harsh industrial conditions and extended temperatures from -40°C to 75°C Available in several models that offer DIN Rail, Wall Mount and Rack Mount options Ruggedized IP30 enclosure for DIN rail mounted switches Fanless operation on both DIN Rail and Rack Mount switches Flexible PoE support with IEEE 802.3af, 802.3at and 802.3bt offering up to 90W PoE on select models Dual DC power input supported by all switch models Full wire speed Layer 2 with highly Resilient LACP, Spanning tree STP, RSTP & MSTP, fast Ring fail-over and G.8032 ERPS protection options Integrated Fabric Attach capability for secure, automated connection to Extreme Fabric Connect services CLI and web-based configuration support ExtremeCloud IQ Site Engine based monitoring

Extreme Networks' Fabric technology is revolutionizing the way enterprise networks are managed, secured, and scaled. Through intelligent automation and simplified management, Extreme Fabric enables greater agility, reduces manual configuration effort, and minimizes security risks. With zero-touch provisioning capabilities and automatic discovery of new devices, IT teams can deploy and manage networks faster. Meanwhile, built-in segmentation provides increased threat protection by isolating traffic and minimizing attack surfaces. With Extreme Fabric, organizations benefit from increased efficiency, greater scalability, and a future-proof architecture that can flexibly adapt to changing requirements.

Composed of a powerful compact controller and a high-resolution camera, the intuitive EYE+ smart control system integrates AI-based algorithms to optimize the performance of your Asycube flexible feeder. EYE+ manages all components of your application including the robot via the EYE+ Studio web-based interface. Thanks to a large number of ready-to-use plugins for robots and feldbuses such as EtherNet/IP, EtherCAT and PROFINET, you can easily integrate EYE+ into any automation machine.

Robot guidance made simple and efficient EYE+ XTD brings a new level of flexibility to robotic part localization. Powered by advanced AI algorithms, it provides accurate part coordinates—whether parts are placed on conveyors, in thermoformed trays, or on complex surfaces. From cable connection to first part pick, the intuitive interface guides you step by step—accelerating deployment and boosting productivity in demanding automation environments.

THE stereo microscope trusted by thousands of customers globally to deliver excellent high quality images for a wide range of applications in an easy to use ergonomic package. Superb large image – no eyepieces Superior ergonomics for fatigue-free viewing Integrated digital camera Mantis is an award-winning ergonomic stereo microscope which offers exceptional operator comfort and superb 3D imaging. No awkward eyepieces means a stress-free viewing experience, see more and do more than is possible with conventional binocular microscopes. See every detail, even with demanding subjects See the finest detail in a large, high resolution, high contrast, optical stereo image. Whether you are viewing your subject in the eyepiece-less viewer or a separate monitor, Mantis stereo microscope delivers the superior image quality you need to perform your inspection tasks accurately and quickly. Mantis’ superior microscope ergonomics allows higher levels of concentration and lowers fatigue to give you better performance. It enables relaxed, stress-free viewing and the eyepiece-less design reduces eye activity, and thus eye strain. Manipulate your subject easily with long working distance, accurate 3D view, and quick magnification change.