Exhibitor products

The Matrix 120™ is the smallest ultra-compact industrial 2D code reader on the market and also the smallest compact 2D code reader with an integrated Ethernet interface. Its compact size makes it easy to integrate even in the most confined spaces. The Matrix 120™ is available in several versions, including a WVGA image sensor for standard applications and a 1.2 MP sensor for high-resolution barcodes. A wide-angle version is also available – the ideal solution for reading codes at close range. The Matrix 120™ meets the highest industrial standards with an IP65 protection rating and an operating temperature range of 0 to 45°C (32 to 133°F). It also features a glass-free reading window suitable for food and beverage environments. ESD-safe models are also available for applications in the electronics industry. Like the rest of the Matrix series code readers, the Matrix 120™ leads the way in ease of use with its DL.CODE™ configuration software, X-Press™ button, and intuitive user interface. The Matrix 120™ represents the entry-level model among the powerful, industry-unrivaled Matrix series of industrial 2D code readers.

Ihre Lösung – so individuell wie Ihr Projekt Das DATANET MODUL® ist keine Standardlösung von der Stange. Ab sofort stehen Ihnen zwei flexible Wege zur Verfügung: 1. Komplettlösung aus einer Hand – fertig konfiguriert von YELLO Netcom Sie liefern uns Ihre Anforderungen – wir übernehmen die Planung, Konfiguration und Fertigung Ihrer individuellen Netzwerkbox. Die Installation vor Ort kann optional durch externe Partner erfolgen, die wir bei Bedarf vermitteln. 2. Ausstattungspakete für Ihre Container-Lösung Sie möchten Ihre Container oder modulare Gebäude eigenständig ausrüsten? Wir stellen alle erforderlichen Netzwerk- und Stromkomponenten individuell für Sie zusammen – exakt nach Ihren technischen Vorgaben. YELLO Netcom liefert diese Ausstattung direkt an den Verwendungsort und unterstützt Sie bei der Planung, Koordination und – falls gewünscht – bei der Auswahl geeigneter Dienstleister für die Installation.

DBR77 IoT connects machines, sensors, and systems to capture real-time production and logistics data across your facility. It eliminates manual reporting and provides a consistent data layer for monitoring performance, including cycle times, OEE, downtime, and resource usage. Detect deviations early and gain full visibility into operations in one unified view. Designed for fast deployment and integration with legacy and modern equipment, the system scales across sites and use cases. Collect → Analyze → Improve: enable data-driven decisions, support continuous optimization, and provide the foundation for Digital Twin and AI applications.

Drive systems can be easily implemented with cost-effective DC/BLDC motor controllers. Since 2015, with the introduction of the Universal Motor Controllers UMC 300 (DC) and BMC 300H (BLDC), motor controllers for motor currents up to 10 A in continuous operation have been available. The available digital inputs, various signal outputs, and, last but not least, the optional CANOpen connection provide various options for solving control tasks easily and cost-effectively. Additional hardware components can also be offered and manufactured for specific projects. The example shows an LED display that can be plugged separately onto the existing post connector and the additional heat sink for cooling the rectifier. For applications with smaller motors, the UMC 51 motor controller is also available; it is capable of operating DC or BLDC motors with continuous currents of 2.5 A (5 A peak). Due to the size of only 43 x 50 mm, analog connections are limited, but almost all functions of the larger series are also available via the CANOpen interface.

Brushed DC motors can be used universally due to their simple structure. Therefore, there are hardly any applications in which DC motors do not play a certain role. Advantages of our DC motors: • Exact adjustment to the correct operating point • Cost-effective design • High efficiency and power density • Ideal for battery operation • Simple control via DC voltage and PWM • Available from 4 mm diameter and in flat designs • Gear boxes in many versions Our DC motors are available in different motor designs and with customer-specific attachments • Connections (connectors, soldering pads, metal contacs, ...) • Encoders (optical, magnetical, Hall-sensors, magnet on shaft) • Gears and bearings • Coil (iron anchor, bell runner, flat runner) • Commutation (metal or carbon) • Output (D-cut, double D-cut, pinion, round shaft) and customized adaptation (winding, speed and torque, insulation class, service life, mechanical interfaces, ...).

Battery-buffered UPS systems offer many advantages and can be used in many different ways: - Possible operation modes: Stand-by-parallel operation, buffer battery system - Ready for connection - Master-Slave-operation to increase power - Redundant-operation possible - Battery management by micro-controller - Shut-down-input referring to ground - Boost charge can be activated by control input referring to ground - Detection of battery wire break and battery test

The DC-Buffer Module C-TEC works with Ultra-Capacitors as an Energy Storage inside the Unit. In Case of an interruption of the DC-Supply, the Energy of the Ultra-Capacitors will be released. The load from the Buffer Module, until it is discharged. The Back-Up time depends on the state of charge of the capacitors and the discharge current. Highlights: - Compact design, assembled in one housing - Maintenance-free - Deep discharge protection, thus unlimited storage period - Operation under extreme temperatures possible (extremely high, extremely low) - No gas generation, installation in hermetic seated housing possible - Fast availability because of short recharge time after discharging

Decentralized automation system – zero cabinet Into the field, decentralize, modularize, combine technologies, act more energy efficiently, reduce and simplify complexity and find smart solutions. This is what Vario-X achieves: 100 percent decentralized automation without control cabinets. The Vario-X system solves increasingly complex production challenges. Vario-X is a modular system with solutions for every machine need imagined down to the smallest detail. You can plan and expand your system according to all the rules of the art – flexible, scalable, machine mountable and compact. Our decentralized system eliminates the need for time-consuming installation. Set-up times and error sources are eliminated. Service and down-times are adjusted to your production cycles through predictive maintenance. Sounds complex, but Murrelektronik makes it quite simple! The future of automation is cabinetless.

The new VS series inspires with a compact, slim body and with outstanding speed and accuracy. Compared to the previous series, the arm is more compact which enables space-saving workflows. In addition, the cycle time and the position repeatability has improved. In order to avoid the tangling of cables the internal wiring up to the flange (option communication flange) allows to connect e.g. servo grippers and ethernet devices directly to the flange. The VS-050 and VS-060 have an arm reach of 505mm and 605mm and a max. payload of 4kg. The robots can be mounted on ceiling, floor or wall. Various protection grades e.g. clean room (ISO 3/5), dust & splash proofed (IP65/54) and IP 67, ESD, ATEX are available.

IO-Link is becoming more and more established on the market - and the trend is rising. IO-Link is already being used in machine tools, production lines, in intralogistics and in packaging machines. The simple structure, the reduced costs and the prerequisites for entry into future Industry 4.0 concepts are the key arguments. key arguments. IO-Link products from Kübler open up new possibilities for your application. The product portfolio is now being expanded with the IO-Link master as a gateway to the world of Industrial Ethernet, enabling comprehensive connection of field devices to Ethernet-based systems. Kübler has added suitable IO-Link masters for the most common Ethernet protocols Ethernet/IP, EtherCAT and PROFINET to its portfolio to match the existing IO-Link sensors. The masters are available from stock in versions with 4 or 8 ports (Class A and Class B) and enable simple integration into the Ethernet world. Thanks to the system concept, complete, coordinated systems can be created together with the IO-Link field devices and the appropriate cables and connectors. The masters also support SIO mode, which means that existing field devices with classic switching signals can be easily integrated. Kübler thus offers an efficient, all-in-one solution for numerous applications.